6
Eastwood Technical Assistance: 800.343.9353 >> [email protected]
ADJUSTMENTS
STOP FENCE ANGLE
The Stop Fence features a built-in degree scale
to allow angled cuts up to 45° in both direc-
tions
(FIG 1)
. To do so:
• Slightly loosen both retaining bolts of
the Stop Fence with a 17mm wrench
(not included).
• Carefully align the selected engraved
degree mark on the Stop Fence with
the engraved reference line on the
Saw Base
(FIG 1)
.
NOTE:
For the greatest accuracy of
cut angle, the use of a protractor
(not included) or machinists square
is highly recommended.
• Before tightening the retaining bolts,
place a protractor (not included) or
square (not included) against the Stop
Fence and face of the Blade for an
accurate reading then tighten the
retaining bolts
(FIGS 2 & 3)
.
Unplug Saw from electrical supply before making any adjustments.
FIG. 1
FIG. 2
FIG. 3
