Eastwood 13542 Скачать руководство пользователя страница 7

Страница: 7 / 20

To order parts and supplies: 800.343.9353 >> eastwood.com

MOUNTING BUFF

WHEELS

#51460, 1 HP, DUAL-SPEED MOTOR

Left Side

• Slip Spacers

[E]

[F]

over Arbor Shaft

to the step of the Shaft

(FIG 1)

• Place a Buff Wheel Support Flange

[D]

onto the shaft up to the spacers

[E]

[F]

and with the cupped surface facing

outward

(FIG 1)

• Push a Buff Wheel of choice (not

included) over the threaded end of the
Shaft up to the Buff Wheel Support
Flange

[D] (FIG 2)

• Add another Buff Wheel Support Flange

[D]

with the cupped face toward the

Buff Wheel.

• Thread Special, Left-Hand Threaded

Arbor Nut

[B]

onto Shaft threads up

against the Buff Wheel Support Flange

[D] (FIG 2)

• Use a wrench (not included) to snug up

the Nut while holding the Buff Wheel.
Another wrench (not included) may be
placed around the flats at the inner sur-
face of the Shaft to keep it from rotating
if required.

Right Side

• The Right-Side procedure is identical to

the Left except for using the Standard,
Right-Hand Threaded Arbor Nut

[C]

FIG. 1

FIG. 2

D D

E F

Содержание 13542





















Результаты поиска

Содержание 13542

Отзывы:

Похожие инструкции для 13542

Бренды по названию

Популярные бренды

Eastwood 13542, Инструкция по эксплуатации

Результаты поиска

Содержание 13542

Отзывы:

Похожие инструкции для 13542

Бренды по названию

Популярные бренды