6
Eastwood Technical Assistance: 800.343.9353 >> [email protected]
INJURY HAZARD – DO NOT USE
GRINDING WHEELS ON THIS BUFF MOTOR!
• This Buff Motor is designed for use only with Fabric Buff Wheels and does
not have the shaft support or necessary guards to protect the operator form
solid debris or shattering grinding wheels.
BURN HAZARD!
• Applying excessive pressure against a wheel while buffing can rapidly build
heat in an object and cause burns and damage to the object. Do Not apply
excessive pressure while buffing.
• This Buff Motor will eject a trail of grit, fibers and debris at high speed
which can injure others nearby. Keep all persons and pets away from
the work area.
ADDITIONAL SAFETY INFORMATION
SET UP FOR USE
• Place the Buff Motor on a clean, level, dust and grit free surface. The rubber feet of the cast
iron Buff Motor Housing are designed to assist with stability during normal operation, however
it is strongly recommended if the Buff Motor is to be operated on a bench, it should be placed
securely to prevent any chance of it working its way to the edge and falling. Bolting in place or
the use of C-Clamps is strongly recommended.
• If mounting to an optional Buff Stand such as Eastwood #13162, the Stand MUST be securely
bolted to the floor and the Buff Motor securely bolted to the Stand.
• The Buff Motor must be operated with at least 3 ft of working room around in all directions.
• Keep power cord away from Buff Wheel. The unit is equipped with a 6’ [1.8 m] long, grounded,
power cord. If an extension cord is required, use 14 ga. or heavier. Do not exceed 25’.
• Buff Wheels will shed and deposit a great deal of fiber, excess buff compound and grit on floor
and wall areas in the plane of the rotating wheel. Locate in an easily cleaned area capable of
accepting debris.
