8
Eastwood Technical Assistance: 800.343.9353 >> [email protected]
#13542, 1/2 HP BUFF MOTOR
Left Side
• Slip Spacer
[E]
over Arbor Shaft to the
step of the Shaft
(FIG 3)
.
• Place a Buff Wheel Support Flange
[D]
onto the shaft up to the spacer
[E]
and
with the cupped surface facing outward.
(FIG 3)
.
• Push a Buff Wheel of choice (not
included) over the threaded end of the
Shaft up to the Buff Wheel Support
Flange
[D] (FIG 4)
.
• Add another Buff Wheel Support Flange
[D]
with the cupped face toward the
Buff Wheel.
• Thread Special, Left-Hand Threaded
Arbor Nut
[B]
onto Shaft threads up
against the Buff Wheel Support Flange
[D] (FIG 4)
.
• Use a wrench (not included) to snug up
the Nut while holding the Buff Wheel.
Another wrench (not included) may be
placed around the flats at the inner sur-
face of the Shaft to keep it from rotating
if required.
Right Side
• The Right-Side procedure is identical to
the Left except for using the Standard,
Right-Hand Threaded Arbor Nut
[C]
.
FIG. 3
B
FIG. 4
D D
E
B
D
