2
Eastwood Technical Assistance: 800.544.5118 >> [email protected]
SPEcIFIcATIONS
Our Eastwood-designed Versa-Cut Plasma Cutter is your smartest choice for making clean, fast cuts through steel, stainless or aluminum
as thin as 24-gauge, or as thick as 3/8”. Compared to mechanical cutting, our Versa-Cut Plasma Cutter works significantly faster, and
makes curved and intricate cuts more easily and precisely. Inverter technology offers superior arc stability and cutting power using either
110 or 220 volts, making this a portable unit that is also light weight. A built in pilot arc system allows for instant arc striking and ease of
use when cutting rusty material and expanded metal. The internal moisture separator helps to ensure clean dry air gets to the torch to
give you consistent results.
STATEMENT OF LIMITED WARRANTY
The Eastwood Company (hereinafter “Eastwood”) warrants to the end user (purchaser) of all new welding and cutting equipment (collectively called the “products”) that it will
be free of defects in workmanship and material. This warranty is void if the equipment has been subjected to improper installation, improper care or abnormal operations.
WARRANTY PERIOD:
All warranty periods begin on the date of purchase from Eastwood. Warranty Periods are listed below, along with the products covered during those warranty periods:
3 Year Warranty on Material, Workmanship, and Defects:
• Eastwood Versa-Cut Plasma Cutter
Items not covered under this warranty: Electrodes, nozzles, diffuser, and external nozzle.
All other components are covered by the warranty and will be repaired or replaced at the discretion of Eastwood.
2 Years:
• All Welding Helmets.
CONDITIONS OF WARRANTY TO OBTAIN WARRANTY COVERAGE:
Purchaser must first contact Eastwood at 1-800-345-1178 for an RMA# before Eastwood will accept any welder returns.
Final determination of warranty on welding and cutting equipment will be made by Eastwood.
WARRANTY REPAIR:
If Eastwood confirms the existence of a defect covered under this warranty plan, Eastwood will determine whether repair or replacement is the most suitable option
to rectify the defect. At Eastwood’s request, the purchaser must return, to Eastwood, any products claimed defective under Eastwood’s warranty.
FREIGHT COSTS:
The purchaser is responsible for shipment to and from Eastwood.
WARRANTY LIMITATIONS:
EASTWOOD WILL NOT ACCEPT RESPONSIBILITY OR LIABILITY FOR REPAIRS UNLESS MADE BY EASTWOOD. EASTWOOD’S LIABILITY UNDER THIS WARRANTY SHALL NOT
EXCEED THE COST OF CORRECTING THE DEFECT OF THE EASTWOOD PRODUCT. EASTWOOD WILL NOT BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES (SUCH
AS LOSS OF BUSINESS, ETC.) CAUSED BY THE DEFECT OR THE TIME INVOLVED TO CORRECT THE DEFECT. THIS WRITTEN WARRANTY IS THE ONLY EXPRESS WARRANTY
PROVIDED BY EASTWOOD WITH RESPECT TO ITS PRODUCTS. WARRANTIES IMPLIED BY LAW SUCH AS THE WARRANTY OF MERCHANTABILITY
ARE LIMITED TO THE DURATION OF THIS LIMITED WARRANTY FOR THE EQUIPMENT INVOLVED. THIS WARRANTY GIVES THE PURCHASER SPECIFIC LEGAL RIGHTS.
THE PURCHASER MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE.
Amperage
Output Range
14-40 Amps
Output
Voltage
96 V
Weight
29 Lbs.
Duty
Cycle
60%
@ 40 A
OVERALL
DIMENSIONS
20.0”
(508 mm) x
9.75”
(248 mm) x
20.0”
(508 mm)
Electrical
Input
110 VAC or
220 VAC
Air
Requirements
5-7 CFM @
20-60 PSI
DuTY cYcLE
The rated Duty cycle refers to the amount of welding that can be done within an amount of time. The Eastwood Versa-Cut Plasma Cutter has
a duty cycle of 60% at 40 Amps. It is easiest to look at your cutting time in blocks of 10 Minutes and the Duty Cycle being a percentage of
that 10 Minutes. If cutting at 40 Amps with a 60% Duty Cycle, within a 10 Minute block of time you can cut for 6 Minutes with 4 Minutes of
cooling for the cutter. To increase the duty cycle you can turn down the Amperage Output control.
