background image

5

Precautions While Grinding

Clean the main housing with a wet towel soaked in warm water and do 

not use any type of a cleaning chemical on the base.   

Main Housing

Your grinder’s Main Housing contains all of the moving mechanical parts 

and electrical components so use proper care when cleaning.  Make 

sure that the Main Housing is unplugged from the outlet before cleaning. 

Clean the Main Housing with a damp cloth.  Do not use any type of a 

cleaning chemical on the Main Housing.

Do not immerse the Main Housing in water or any 

other liquid.  Failure to follow this warning may 

result in electric shock, injury, or even death.

Metal and Plastic Parts of the Grinder

Wash the metal Grinder Housing, Locking Nut, Hopper Plate, Feed 

Screw, and Cutting Plate in warm soapy water. Plastic accessories can 

be washed in dishwasher - top shelf.  All plastic accessories are also to 

be washed warm soapy water.  Rinse, clean and dry thoroughly.  Failure 

to dry the metal parts thoroughly may result in rust.  To protect against 

rust apply a light coat of vegetable oil the cutting blade and to the 

cutting plates prior to any length of storage. 

 

The Cutting Plates and Blade are stainless steel and may be washed 

in the dishwasher.  No other parts should be washed in the dishwasher.  

For storage you can apply a light coat of vegetable oil to any or all of the 

metal parts.

Follow these safety precautions while using your grinder or while 

handling food:

Do not use fingers to scrape food away from 

the Cutting Plate(Locking Nut area) while the 

appliance is operating.  Failure to  follow may 

result in cut type injuries.  Avoid contacting 

moving parts.  Never feed food into the grinder’s 

head by hand.  Always use the food pusher.

• Wash hands thoroughly prior to handling any food.
• Make sure all utensils, containers, and countertops are thoroughly  

  cleaned and disinfected before using. 
• Thoroughly clean and disinfect all cutting boards, wooden or plastic
• Before plugging in the grinder, make sure the switch is in the OFF  

 position
• After grinding, store ground items in refrigerator or freezer.

WARNING

WARNING

Содержание 38245

















Отзывы: