background image

11

Grinding Meat

Avoid contacting moving parts with your 

hands, loose clothing, or hair.  Never feed 

food into the grinder housing by hand.

Always use the food pusher.  Failure to

follow this warning may result in severe 

injury, or even death.

Cube your meat into small pieces approximately 1 to 1-1/2 in. square 

and place the cubed meat onto the top tray of the Hopper Tray.   

Place the food tray under the front of the Grinder Housing to catch 

the discharged ground meat. Plug in the Main Housing and then 

press the ON/OFF switch.  Use the Food Pusher to firmly press the 

meat downward into the Grinder Housing.  Do not press so hard as 

to stall the grinder.  Add additional cubed meat to the Hopper Tray as 

needed and carefully watch the bowl or plate to insure that it does 

not overspill with ground meat.  Once the food tray is full, turn off 

the grinder by pressing the ON/OFF switch.  Remove the ground 

meat from the bowl or plate and store in a clean container in the 

refrigerator or freezer (Figure 8).

Figure 8

Use the Food Pusher to firmly press 

the meat downward into the Grinder 

Housing.  

DO NOT USE YOUR 

HANDS TO PUSH FOOD INTO 

THE GRINDER.

WARNING

Содержание 38245

















Отзывы: