Ultimate GROUND SUPPORT BASE Step #1
Measure 3½” and 5” in from each corner of both
Gs2655’s (as shown in photo).
Stand up ground supports on end and install with
1 - 3” lag through GS2655 into R2655. Use the
3½” and 5” marks you made earlier as guides.
NOTE:
The counter sink holes in R2655 should
face the inside of box. The counter sink holes on
Gs2655 should face outside of box.
Measure from corner to corner on each side of
ground support base. Make sure your
measurements are the same. This will square of
base.
R2655
Gs2655
3½ ”
5”
R2655
R2655
G
S
2
6
5
5
G
S
2
6
5
5
R2655
R2655
G
S
2
6
5
5
G
S
6
4
5
5
1 - 3” lag in
each corner
Countersink
Holes
Countersink
Holes
Layout ground support base boards.
2 - Gs2655
2 - R2655
(as shown in the photo).
10