SWING BEAM Installation Step #20
Place wall rail 5 ½”down from top
rail WR2455 of clubhouse (as
shown in photo).
Install swing beam into CB46114
in between wall rails as pictured.
Countersink two holes into end
of beam using a 7/8 spade bit.
Install 2 - 5” Lag bolts, through
beam into Ts4484.
Using the same process but
from other side countersink two
holes in TS4484 and bolt
through TS4484 into swing
beam using 2 - 5” Lag bolts.
7/8 Counter Sink
Holes on Swing beam
into tent support
T
S
4
4
8
4
Swing Beam
7/8 Counter Sink
Holes on Swing beam
Slide each SS44120 Side
Support leg into the Angled
Side Support Brace. Installing
4 - 3” Lag bolts on each side
Mount side support brace on
beam flush with end. Fasten
with 3-3” lag bolts on each side.
Position beam into place
Fasten with 3”
lag bolts.
5 ½”
3” lags
NOTE:
After leveling swing beam
anchor side supports with
two metal stakes. Fasten
with lag bolt into support.
Swing beam is complete!
25