East EAHI-6000-SL, Руководство пользователя

Страница: 40 / 70

~ 38 ~
NOTE
When the meter is disconnected from the power supply and stops working for more than
one month, you need to confirm the meter parameters again.
In the process of use, you can view the current voltage, current frequency, and other grid
information on the grid side of the system through the meter. When viewing, press the "▲" and
"▼" buttons of the meter, you can switch the display interface of the meter. For details about
the display interface, see the meter instruction manual.
6.4.8 BMS
Lithium battery communication port (connect CANH+, CANL-, and GND-S of the registered jack
of the lithium battery communication port to CANH+, CANL-, and GND-S of the crystal interface
on the housing. The default communication mode for BMS is RS485. Connect A of RS485 for
battery communication to the pin 5 of the RJ45 and B of RS485 to the pin 4 of the RJ45 at the
inverter end.
Pin 1 2 3 4 5 6 7 8
Definition CANL- CANH+ CANL- CANH+ GND-S Reserved