East EAHI-6000-SL, Руководство пользователя, Страница: 29 / 70

~ 27 ~
Fig. 6.3.1.1
③
Fix the waterproof terminal on the waterproof cover. In Fig.6.3.1.1, route 2 through the
waterproof cover and tighten 1.
④
Connect the cable section from which the insulation layer is stripped to the terminal (freely
provided), as shown in Fig. 6.3.1.2, and press it tightly.
Fig. 6.3.1.2
⑤
Fix the terminals in Fig. 6.3.1.2 to the EPS terminal on the housing in Fig. 5.4.1 by the
screws (freely provided) (three AC terminals at right side), and L, N, PE correspond to L,
N, PE on the housing.
6.3.2 Load end connection
Procedure:
①
According to the wire diameter in Table 6.2, select the L (red/brown), N (black/blue) and PE
(yellow-green) cables with appropriate wire diameter, strip off 5 mm insulation layer and
route the cables through the waterproof cover and waterproof terminal as shown in Fig.