Mounting on wall:
Mark 2 drill holes on the wall and align them horizontally. Distance
between the center of marks should be 72mm. Drill the holes using a
6mm bit to 30mm depth.
Insert the expansion bolts into the drill holes. Insert the ST4.2 screws
into the expansion bolts. Leave the screw heads protruded from the
wall surface for 4mm.
Align the mounting holes on the product to the protruded screws.
Hang the product onto the mounting screws. Ensure the product is
stably attached.
Mounting on DIN Rail
Mark 2 drill holes using the DIN rail as a template. Distance between
the center of marks should be 186mm. Drill the holes using a 6mm bit
to 30mm depth.
Insert the expansion bolts into the drill holes.
Install the guide rail onto the EASMANAGER with M3*6 countersunk
head screws
6
V.1
