FULL Rate
(one pass)
HALF Rate
(two passes)
SPREAD PATH
© 2015 Earthway Products, Inc. All rights reserved
Earthway Products, Inc.
1009 Maple Street, PO Box 547
Bristol, IN 46507
For Your Records
Date Purchased
Place of Purchase
HOW TO ORDER SPARE PARTS
All spare parts listed may be ordered direct from
Earthway Products, Inc.
Be sure to give the following information when ordering.
Model Number
Part Number
Part Description
Call (574) 848-7491, 800-294-0671, or
email: [email protected] for current prices.
OPERATING INSTRUCTIONS
Before filling hopper, become familiar with the operation of this spreader.
5
Obtain proper setting for material to be used from the enclosed SETTING MATRIX included with this spreader, or from our
web site under the MANUALS SECTION.
5
Move stop bolt on rate gauge assembly to the proper setting.
5
While pushing spreader forward, pull control lever back to stop bolt.
5
To stop, push lever forward to close flow holes before you stop moving.
5
When finished, empty any remaining material from hopper.
5
Thoroughly wash spreader and allow to dry before storing. Apply coating of light oil to help prevent corrosion.
5
If you use Rock Salt,
remove agitator
when using Rock Salt to prevent damage to the gearbox.
5-YEAR LIMITED WARRANTY
Earthway Products, Inc. warrants this product free of defects in original workmanship and materials for a period of 5-Years
to the end user with the original purchase receipt. If a manufacturing non-conformance is found, Earthway Products, Inc.
at its discretion will repair or replace the part(s) or product at no charge provided the failure is not the result of incorrect
installation, mishandling, misuse, tampering, or normal wear and tear as determined by Earthway. Earthway at its discretion
may require that the part(s) or product be returned along with the original purchase receipt at owners’ expense for examination
and compliance with the terms of this warranty. Do not return any product without first receiving authorization from Earthway
Products, Inc. To seek remedy under this warranty, contact Earthway Products, Inc. at 574-848-7491, techsupport@earthway.
com or write to Earthway Products, Inc. P.O. Box 547 Bristol, Indiana 46507 and describe the nature of the manufacturing
defect.
SPECIFIC LIMITATIONS:
This warranty covers only the part(s) or product; any labor charges associated with repair
or replacement of non-conformances are specifically excluded. Due to the corrosive nature of most fertilizers and ice melt
products, Earthway Products, Inc. makes no warranty against and specifically excludes part(s) or product degradation or
failure due to corrosion or its effects. Clean and dry your spreader thoroughly after each use, as a preventative measure, coat
all metal parts with a light oil or silicon spray, pay most attention to the inside of steel tubing where corrosion will start.
