OUTPUTS (CONT.)
SUB PULSE
+/–5 volts. 25% duty cycle sub octave signal
that is 1 octave lower than the source signal.
The source signal is selected by the
Sub
Source
switch. When set to “INT”, the sub
octave is derived from the internal oscillator.
When set to “EXT”, the sub octave is derived
from the signal that has been patched to the
Shape Insert
jack.
This output is fixed at 1 octave down and does
not respond to changes to the
Sub Octave
panel control.
WE PURPOSELY USED AN “UNPROCESSED”
VERSION OF THIS OUTPUT, RATHER THAN ONE
THAT WAS RESHAPED USING A COMPARATOR
CIRCUIT. IT HAS A SOUND THAT IS MORE RAW
AND AGGRESSIVE.
