Instruction Sheet
Hiller/Furrower Kit with Adapters
Check for parts online at www.getearthquake.com or call 800-345-6007 M-F 8-5
25126 - Husqvarna Hiller/Furrower Adapter
ASSEMBLY INSTRUCTIONS
1. Remove the standard depth stake on the back of the tiller.
SEE FIGURE 1
2. Slide the adapter up into the slot the standard depth stake
was in. SEE FIGURE 2
3. Secure the adapter by inserting the pin above the tiller
hood into the top hole of the adapter. SEE FIGURE 3
4. Secure the hiller/furrower to the adapter with M10 x 30mm
bolt (6) and M10 locknut (11). SEE FIGURE 4
NOTE: When tightening the hiller/furrower to the
adapter, make sure the bracket on the hiller/furrower is in
complete contact with the adapter and not tightening to
the depth stake mount of the tiller.
FIGURE 1
FIGURE 2
FIGURE 3
FIGURE 4
