background image

Instruction Sheet

Hiller/Furrower Kit with Adapters

25128 - Troy-Bilt & Cub Cadet Hiller/Furrower Adapter

Check for parts online at www.getearthquake.com or call 800-345-6007 M-F 8-5

ASSEMBLY INSTRUCTIONS

1.  Remove the bigger bolt that holds on the kick-back stake 

and set aside. SEE FIGURE 1

2.  Loosen the smaller nut on the kick-back stake to the end of 

the bolt’s threads. SEE FIGURE 2 
NOTE: This allows the adapter to slip into position better.

3.  Place the adapter into the square space of the kick-back 

stake mount. Secure the adapter and kick-back stake to 

drag stake mount with previously removed bigger bolt.  

SEE FIGURE 3

4.  Once the adapter is in place, tighten up smaller nut.
5.  Place the hiller/furrower bracket on the adapter by sliding 

the bracket underneath the adapter. Adapter tail must sit on 

top of bracket. SEE FIGURE 4

6.  Secure the hiller/furrower to the adapter with M10 x 30mm 

bolt (6) and M10 locknut (11). SEE FIGURE 4

  FIGURE 1

  FIGURE 2

  FIGURE 3

  FIGURE 4

Отзывы: