25127 - Southland & Powermate Hiller/Furrower Adapter
ASSEMBLY INSTRUCTIONS
1. Slide the standard drag stake out of the drag stake mount
on the back of the tiller and reinstall it, so that the top of
the drag stake is now the bottom. SEE FIGURES 1 & 2
2. Re-insert the pin for the drag stake, so that the drag stake
end sits flush with the bottom of the mount. SEE FIGURE 2
Place the split side of the adapter over the drag stake and
align the holes. Secure the adapter to the standard drag
stake with M10 x 30mm bolt (6) and M10 locknut (11).
SEE FIGURE 3
NOTE: This adapter uses the extra M10 x 30mm bolt (6)
and M10 locknut (11).
3. Secure the hiller/furrower to the adapter with M10 x 30mm
bolt (6) and M10 locknut (11). SEE FIGURE 4
Instruction Sheet
Hiller/Furrower Kit with Adapters
Check for parts online at www.getearthquake.com or call 800-345-6007 M-F 8-5
FIGURE 1
FIGURE 2
FIGURE 3
FIGURE 4