Earth Stove BV4000C Скачать руководство пользователя страница 3

PAGE 3

TABLE OF CONTENTS

Important Warnings ................................................. 2

Testing / Listing, EPA, Using this Manual ...............  3

Planning Your Installation...................................... 4-7

Installation .......................................................... 8-11

Product Features and Controls  ............................. 11

Care and Operation  .......................................... 13-16

Recommended Fuel ............................................... 17

Maintenance ...................................................... 17-19

Troubleshooting................................................. 20-21

Specifications ......................................................... 22

Replacement Parts List ..................................... 23-24

Optional Accessories.............................................. 25

Safety / Listing Label and EPA Label ..................... 26

Service / Maintenance Log ..................................... 27

TESTING/LISTING

Model BV4000C has been tested to UL Standards;
UL1482 for installation into residential applications.  The
listing laboratory is OMNI Environmental Services,
Beaverton, Oregon.

EPA CERTIFICATION

This fireplace insert has been tested to rigorous emis-
sions standard, and has been certified by the Environ-
mental Protection Agency.

PACKAGING LIST

This appliance is packaged with an accessory package,
which contains the following:

One - Installation and operation instructions manual.
One - Warranty
One - Catalytic combustor temperature probe and

sleeve.

One - Damper Hook

USING THIS MANUAL

Please read and carefully follow all of the instructions
found in this manual. Please pay special attention to the
safety instructions provided in this manual. The Home-
owner’s Care and Operation Instructions included here
will assure you have many years of dependable and
enjoyable service from your appliance.

CONGRATULATIONS ON THE PURCHASE OF YOUR
NEW WOOD BURNING FIREPLACE INSERT MANU-
FACTURED BY LENNOX HEARTH PRODUCTS.

When you purchased your new insert, you joined
the ranks of thousands of concerned individuals
whose answer to their home heating needs reflects
their concern for aesthetics, efficiency and our envi-
ronment. We extend our continued support to help
you achieve the maximum benefit and enjoyment
available from your new insert.

It is our goal at Lennox Hearth Products to provide
you, our valued customer, with an appliance that
will ensure you years of trouble free warmth and
pleasure.

Thank you for selecting a Lennox Hearth Products
insert as the answer to your home heating needs.

Sincerely,
All of us at Lennox Hearth Products

Содержание BV4000C





























Отзывы: