EARLY RIDER HELLION X20, Руководство пользователя

Страница: 22 / 36

22
FRONT SUSPENSION SETUP AND SAG
ADJUSTING AIR PRESSURE
Consult the table on the rear of the air
chamber fork leg for a suggested air pres-
sure. Make sure the bike is level and follow
the instructions below:
1 Unscrew the valve cap on the left hand
(compression) leg and set aside.
2
Use a shock pump (not supplied), to pres-
surize the fork to the desired level (upon
removing the pump you may lose air- this
is air escaping from the pump and doesn’t
affect the pressure in the fork.
3 To decrease the air pressure, we would
recommend using the shock pump as the
air chamber volume is small and will allow
better control.
Note: Changing suspension settings on the
fork can change the handling of the bike.
Always check for changes in handling or
braking by taking a careful test ride after
each adjustment
FOR FURTHER INFORMATION AND
MAINTENANCE TIPS, PLEASE DOWNLOAD
SUSPENSION USER GUIDES FROM
EARLYRIDER.COM
The Hellion X is fitted with an air sprung suspension fork. The air-pressure is set to suit the average weight of rider. At the top you
will see a compression adjust with lock-out. On the bottom of the fork you will find your rebound adjust. You can use these to find
the best set up for your child and riding environment.
RECOMMENDED AIR PRESSURES
RIDER WEIGHT
(KG)
25 - 30
30 - 35
35 - 40
40 - 45
45 - 50
50 - 55
RECOMMENDED
PRESSURE (PSI)
30 - 35
35 - 40
40 - 45
45 - 50
50 - 55
55 - 60
RIDER WEIGHT
(KG)
25 - 30
30 - 35
35 - 40
40 - 45
45 - 50
50 - 55
RECOMMENDED
PRESSURE (PSI)
45 - 50
50 - 55
55 - 60
60 - 65
65 - 70
70 - 75
HELLION X20
HELLION X2
4
COMPRESSION ADJUSTMENT
Use this for when road riding or smooth
paths. This will ensure that energy isn’t
wasted through compression of the forks
when not needed. This adjusts the amount
of force required before the fork begins to
compress - and can be adjusted to lock out
the fork completely.