EARLY RIDER HELLION X20, Руководство пользователя

Страница: 19 / 36

19
2
Remove the split screw from the bracket and fit to the han-
dlebar by slotting the handlebar between the split in
the bracket. Re install the screw and nut and tighten to 3Nm.
1
To fit the reflectors. Locate the 22.2mm right angled
bracket and white reflector. Slide the reflector down on to
the bracket until the it “clicks” into position.
FRONT REFLECTOR
2
Remove the split screw from the bracket and fit to the
seatpost by slotting the post between the split in the
bracket. Re install the screw and nut and tighten to 3Nm.
REAR REFLECTOR
1
Locate the appropriate bracket. Slide the red reflector
down onto the bracket until the reflector “clicks”
into position.