EARLY RIDER HELLION X20, Руководство пользователя

Страница: 20 / 36

20
1
WHEEL REFLECTOR
Your bike will be supplied with 2 x wheel reflectors. These can be installed on either side of the bike. There is one for each wheel
PARTS KIT
continued
To install, slot the wheel reflector between 2 spokes com-
ing from the same side of the hub e.g. drive-side or non
drive-side.
2
Slide the reflector towards the centre of the wheel until
you feel the it locates with a soft “click”into position.
To fit the headset bolt insert - push the insert by hand into the
headset bolt. The insert will help stop water/mud from settling
inside the bolt and protect it from corrosion.
HEADSET BOLT INSERT BELL
Some bikes are supplied with a bell. To install the bell, remove
the bolt using the crosshead screwdriver. Slot the handlebar
between the split in the bell and re tighten the bolt to 3Nm.