Earlex HV4901, Инструкция по эксплуатации

Страница: 21 / 29

EN
21
HV4901
of the valve. Also see the marking on the gun body.
2) Place on the valve cover (Fig. 14, B) and screw it closed.
3) Place the ventilating hose (Fig. 14, A) on the valve cover and on the nipple at the gun
body.
4) Push the nozzle seal (Fig. 18, 5) over the needle (6); the groove (slot) should point
towards you.
5) Place the nozzle (Fig. 18, 4) onto the gun body with the recess facing downwards.
Attention: Position of needle must be congruent with the nozzle aperture. (Fig.19)
6) Put the air cap (Fig. 20, 3) onto the nozzle (4) and tighten it using the union nut (2)
7) Position the adjustment ring (Fig. 21, 1) on the union nut so that the recesses on the
adjustment ring can snap into both horns on the air cap.
8) Place the container seal from below on the suction tube and slide it over the collar,
while turning the container seal slightly.
9) Insert the suction tube with container seal in the gun body.
19. Maintenance
Replace the air filter depending on soiling. Unplug the power plug. Open the cover of the
air filter compartment (Fig. 22, A). Clean air filter with water and leave to dry. If heavily
soiled then replace both air filters (Fig. 22, B). Close the cover of the air filter compartment.
WARNING! Never operate the machine without the air filter; dirt could be
sucked in and interfere with the function of the machine.
In order to mount the gun more easily apply lubricating grease (enclosed) liberally
to the O-ring at the spray attachment (Fig. 15, A).
20. Spare Parts
Spare Parts List Perfect Spray attachment (Fig. 23)
Pos. Designation Order No.
Perfect Spray spray attachment complete with 800 ml container 2352 127
1 Union nut 2352 358
2 Air cap 2352 356
3 Nozzle 2352 355
4 Nozzle seal 0417 706
5 O-ring of spray attachment 0417 308
6 Ventilating hose, valve cover, diaphragm 2304 027
7 Suction tube 0417 357
8 Container seal 0417 358
9 Container with cover 800 ml 0413 909