E01.
The initialization of antenna mainboard failed, please check connections of Tx and Rx cables and N-F connectors also check the antenna
mainboard.
E02.
The detection of antenna power failed, please check connections of Tx and Rx cables and N-F connectors.
E03.
The detection of Skew motor failed, please check antenna mainboard, SK connector and Skew motor.
E04.
The detection of antenna tuner failed, please check tuner on mainboard, cable connection from LNB to Tuner.
E05.
The detection of LNB failed, please check LNB and cable connection from LNB to Tuner.
E06.
The detection of Gyro sensors failed, please check Gyro sensor and cable connection of sensors.
E07.
The detection of EL motor failed, please check the limited sensor, Elevation motor and belt of the EL motor.
E08.
The detection of AZ motor failed, please check the limited sensor, Azimuth motor and belt of the AZ motor.
E11.
The detection of beacon circuit failed, please check the beacon circuit on antenna mainboard.
E12.
The detection of Cross Level motor failed, please check the limit sensor, Cross Level motor and belt of the Cross Level motor.
E90.
The firmware of antenna mainboard may be damaged . Please contact the manufacturer to recovery the firmware.
The parts involved in the above error codes are shown in the figure below.
Error Code and Solutions
Appendix 4
Troubleshooting Guide---Error Code
58
www.eardatek.com