ACU MONITOR
BDU Voltage：
This is ACU output vlotage to ADU. Normal is DC 48V.
ADU Voltage：
This is inside antenna power supply. From ACU, it is 48V. There is one DC-DC
module inside antenna(48V-->24V). All antenna power supply with 24V from
this DC-DC module.
Total Power：
There is one power detector in ACU. All system power consumption is real-time
dectected.
When Searching and Tracking, only Rx Link working, total power is about
30-40Watt
.
TX working with BUC, total power is about
80-110Watt
.
Skew Offset:
mostly for CPI setting.
AGC Value:
this figure effect Signal Strength.
Network:
it shows network from MODEM online or not.
OPENAMIP:
it shows OPENAMIP protocol get through between ACU and
MODEM or not.
Appendix 2
Sub-page Monitor page
44
www.eardatek.com
Check ACU side, press Right button, check Status VIEW page.
