Eagle IntelliMap Journey Скачать руководство пользователя | Manualshive

Страница: 72 / 90

background image

66

depth will flash on the display. When the digital finds the bottom, it will
automatically display the bottom depth again. The digital sonar can be
turned off, however this also turns all automatic features off also, such as
auto sensitivity, auto ranging, and the Fish ID. feature.

To turn the digital off, first press the MENU key and select “SONAR
SETUP”, then select “DIGITAL SONAR”. Press the left arrow to turn it off.

CAUTION!

Turning the digital sonar off also turns the automatic mode off, including
Fish ID, and the depth alarms.

ALARMS
This unit has three different types of sonar alarms.
The first is the Fish Alarm. It sounds when the
Fish I.D. feature determines an echo or group of
echoes is a fish. Another alarm is the Zone Alarm
which consists of a bar. Any echo that appears
inside this bar triggers this alarm. The last alarm
is called the Depth Alarm. Only the bottom signal
will trigger this alarm. This is useful as an anchor
watch, a shallow water alert, or for navigation.

To adjust an alarm, first press the MENU key, then select “ALARMS”.
Now select “SONAR ALARMS”. The screen shown above appears. Fol-
low the instructions below for setting each alarm.

DEPTH ALARMS
The depth alarms sound a tone when the bottom signal goes shallower
than the shallow alarm’s setting or deeper than the deep alarm’s setting.
For example, if you set the shallow alarm to ten feet, the alarm will sound
a tone if the bottom signal is less than ten feet. It will continue to sound
until the bottom goes deeper than 10 feet. The deep alarm works just the
opposite. It sounds a warning tone if the bottom depth goes deeper than
the alarm’s setting. Both depth alarms work only off the digital bottom
depth signals. No other targets will trip these alarms. If you turn the digital
sonar off, the depth alarms will be inoperative. These alarms can be used
at the same time or individually.

To adjust the shallow alarm, highlight the “Shallow Depth” label. To adjust
the deep alarm, highlight the “Deep Depth” label. Both alarms adjust iden-
tically. We’ll use the shallow alarm as an example. Highlight the “Shallow
Depth” label, then press the right arrow key. The screen shown at the top
of the next page appears.

«
...
70
71
72
73
74
...
»

Содержание IntelliMap Journey



























































































Отзывы:

Нет отзывов

Похожие инструкции для IntelliMap Journey

Бренд: Furuno Страницы: 52

echoMAP CHIRP 45 Series

Бренд: Garmin Страницы: 49

Бренд: M-Labs Страницы: 17

Бренд: Raymarine Страницы: 75

Бренд: CES Страницы: 17

Loner DOC-xxxx-xx

Бренд: Blackline GPS Страницы: 15

Бренд: Garmin Страницы: 4

RoadMate Pro 5190T

Бренд: Magellan Страницы: 65

Бренд: Garmin Страницы: 22

GRN-010-02088-01

Бренд: Garmin Страницы: 58

GPSMAP 87 Series

Бренд: Garmin Страницы: 86

Бренд: RUPTELA Страницы: 42

Бренд: CompeGPS Страницы: 2

BI 820 TREK OBD

Бренд: BITREK Страницы: 18

Бренд: UniGuard Страницы: 8

Бренд: EU3C Страницы: 38

Бренд: Weiom Страницы: 24

GPS Kit nuvi 510

Бренд: Garmin Страницы: 58

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды