Eagle IntelliMap Journey Скачать руководство пользователя | Manualshive

Страница: 14 / 90

background image

8

Transducer Assembly and Mounting
The best way to install this transducer is to loosely assemble all of the
parts first, then place the transducer’s bracket against the transom and
see if you can move the transducer so that it’s parallel with the ground.

1. Press the two small plastic ratchets into the sides of the metal bracket

as shown below. Notice there are letters molded into each ratchet. Place
each ratchet into the bracket with the letter “A” aligned with the dot
stamped into the metal bracket. This position sets the transducer’s
coarse angle adjustment for a fourteen (14) degree transom. Most out-
board and stern-drive transoms have a fourteen degree angle.

DOT

2. Slide the transducer between the two ratchets. Temporally slide the bolt

though the transducer assembly and hold it against the transom. Look-
ing at the transducer from the side, check to see if it will adjust so that
its face is parallel to the ground. If it does, then the “A” position is cor-
rect for your hull. If the transducer’s face isn’t parallel with the ground,
remove the transducer and ratchets from the bracket. Place the ratch-
ets into the holes in the bracket with the letter “B” aligned with the dot
stamped in the bracket. Reassemble the transducer and bracket and
place them against the transom. Again, check to see if you can move
the transducer so it’s parallel with the ground. If it does, then go to step
3. If it doesn’t, repeat step 2, but use a different letter until you can
place the transducer on the transom correctly.

RATCHETS

«
...
12
13
14
15
16
...
»

Содержание IntelliMap Journey



























































































Отзывы:

Нет отзывов

Похожие инструкции для IntelliMap Journey

Бренд: Raymarine Страницы: 54

Бренд: Raymarine Страницы: 54

Бренд: Navman Страницы: 8

Бренд: Navman Страницы: 10

Бренд: M-Labs Страницы: 17

Бренд: Garmin Страницы: 16

Бренд: Garmin Страницы: 8

nuvi 205W-Series

Бренд: Garmin Страницы: 8

Бренд: Garmin Страницы: 112

Бренд: Transystem Страницы: 31

Бренд: Gosafe Страницы: 26

Бренд: NorthStar Страницы: 70

Бренд: NorthStar Страницы: 87

Traffic Assist 7927

Бренд: Becker Страницы: 2

Бренд: Kingwo Страницы: 16

Бренд: Kingwo Страницы: 18

Бренд: Kingwo Страницы: 22

Бренд: AutoConnect Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды