Eagle IntelliMap Journey Скачать руководство пользователя | Manualshive

Страница: 38 / 90

background image

32

then select “CLOCK ALARM” and press the right
arrow key. Now select "SET CLOCK ALARM".
The screen at right appears. Using the arrow keys,
enter the alarm’s time. Press the ENT key. The
unit returns to the clock alarm menu. Highlight
the “CLOCK ALM OFF ON” label and press the
right arrow key to turn it on. Press the EXIT key
to erase the menus. The unit returns to group H
with the new alarm time in the clock’s window.

Group I
This group has a trip timer (TRP TIMER), esti-
mated time enroute (ETE), a digital clock, and
estimated time of arrival (ETA). The trip timer
measures the total time you have been travel-
ling. It starts counting when you exceed a preset
speed. The default is 5 miles per hour. You can
adjust this time from zero to 200 m.p.h.. To do
this, press the MENU key, then select “TRIP
TIMER SETUP” menu. Highlight the “TRIP
START GS” label, then press the left or right arrow keys until the desired
speed appears. Press the EXIT key to erase this screen.

Group J
There are three timers on this screen and an
odometer (TRIP DIS). The trip timer is described
in group I.

Trip distance measures the distance you’ve trav-
elled since it was last reset. To reset the trip meter,
press the MENU key, then select “TRIP METER
RESET” and press the right arrow key. The unit
returns to Group J with the trip meter reset to
zero.

The up timer starts at zero and counts up. The up timer also has an alarm.
The down timer starts from a user setting and counts down to zero.

To start a timer, first press the MENU key, then highlight the desired timer
setup menu. In this example, we’re using the count up timer, so the UP
TIMER SETUP was selected. Now press the right arrow key. A screen
similar to the one at the top of the next page appears. To start the timer,
simply highlight the “UP TIMER” menu, then press the right arrow key. To

«
...
36
37
38
39
40
...
»

Содержание IntelliMap Journey



























































































Отзывы:

Нет отзывов

Похожие инструкции для IntelliMap Journey

Бренд: YachtSafe Страницы: 5

Бренд: Eagle Страницы: 36

Бренд: Garmin Страницы: 108

Бренд: Garmin Страницы: 10

Бренд: Garmin Страницы: 6

Бренд: Garmin Страницы: 12

Бренд: Bushnell Страницы: 28

Бренд: Amprobe Страницы: 32

Бренд: San Jose Страницы: 40

Бренд: Emprex Страницы: 20

Бренд: CyBike Страницы: 2

Бренд: LIGHTNING GPS Страницы: 2

Бренд: Garmin Страницы: 16

BMW Motorrad Navigator III

Бренд: Garmin Страницы: 50

Бренд: Boomerang Страницы: 2

GeoChaser Control

Бренд: 12trace Страницы: 9

Бренд: Simrad Страницы: 130

RoyalTek BV-3200

Бренд: RTK Страницы: 34

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды