manualshive.com logo in svg

Eagle EV-30, Руководство пользователя

Поделиться
Скачать
Eagle EV-30 Скачать руководство пользователя страница 89

rev_0.6

89 / 135

Leads are shown in white, can be distinguished easily from the original contours, and can not be selected
separately without the originals.

The picture below shows a different result on the same part with the option Change type, keep position
selected and the option Check leadline unchecked. In this result, the lead-ins are placed to the original start
positions of the contours and the lead-ins on the two small circles are longer than their radius, not corrected
automatically.

The option Type, Angle, Length and Radius specify the geometry of lead-ins and lead-outs.

Type

Description

None

Machining begins or ends directly on the contour without lead-in or lead-out.

Line

A straight line leads in to or out from the contour.

Arc

An arc leads in to or out from the contour.

Line +
Arc

A straight line and then an arc lead in to the contour, or an arc and then a straight line
lead out from the contour.

Содержание EV-30








































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды