CORRECT
Centered Load
Full rated
bracket capacity
3
ASSEMBLY INSTRUCTIONS
Q-LEVER Cantilever Shelving
(continued on next page)
IMPORTANT
EVENLY DISTRIBUTED LOAD NOT TO EXCEED THE FOLLOWING WEIGHT CAPACITIES:
left-to-right
weight capacity
weight capacity
weight capacity
total unit max.
nominal length
of top (wire) shelf
per mid (wire) shelf
of bottom shelf
weight capacity
Units with All-Wire Shelving
24˝ to 72˝
600 lbs.
600 lbs.
600 lbs.
2,800 lbs.
Units with Bottom Dunnage Shelf
24˝ to 72˝
600 lbs.
600 lbs.
1,000 lbs.
2,800 lbs.
WARNING
THE DEPTH OF THE LOAD SHOULD NEVER EXCEED THE LENGTH OF THE SHELF BRACKET.
• Maximum capacities based on evenly distributed load.
• NEVER exceed 1,000 lbs. load on bottom dunnage shelf.
• NEVER exceed 2,800 lbs. of evenly distributed load on any single configuration.
*
Legs are required to be underneath brackets & shelf.
INCORRECT
Tip Loading
Bracket capacity may be
reduced by up to 50%
(Load exceeds bracket length)
(improper placement
of load)
Do NOT install onto
back side of unit.*
CAUTION:
Bottom shelf should be loaded first. Place heaviest objects onto bottom shelf.
