4810 Clover Road • Greensboro, NC 27450 • 1-800-336-2776 • www.eagleequip.com • © Eagle Equipment 2018.01 • page 13
Figure 16
Figure 19
Figure 20
Figure 21
Figure 17
Figure 18
1. ADJUSTING OPERATION CONT.
1.2.3. MOUNTING TIRE
Before mounting the tire, please make sure that dimension of tire bead is in accordance with the
tire rim. To avoid any damage to tire, lubricate the tire bead and the wheel rim with the lubrication
recommended by manufacturer. Put on the tire and check the situation.
If the rim diameter and width are same as that of tire, it is not necessary to loosen and lock vertical
arm. Only put tire on rim, move swing arm to position when demounting tire, put one side of tire
bottom bead upon rear of demount/mount head, and the other side of tire bottom bead below front
of demount/mount head. Press tire manually or by pressing roller C of assist arm, rotate tire installation
base and tire bottom bead can be mounted. Please use the bead pressing tool (optional device)/left
assist arm tire pressing function (Figure 21) for auxiliary operation if necessary.
Repeat above operation to mount tire top bead.
2. ASSIST ARM APPLICATION
The assist arm is located at the right side of the machine and is an auxiliary device to help the operator
to demount and mount the tire.
