Installation, Operation and Parts Manual
EE-62CE-60T
8
PACKING, STORAGE AND TRANSPORTATION
Packing, lifting, handling, transporting operations must be performed only by experienced personnel with
appropriate knowledge of the lift and after reading this manual. Packing, lifting, handling, transporting operations
must be performed only by experienced personnel with appropriate knowledge of the lift and after reading this
manual.
2.1 The lift was dismantled into the following 3 parts for transportation
Nom
Packed by
Dimension(mm)
Weight (kg)
Quantity
Lift –C12
Steel brackets
2850×660×940
1230
1
Extension post –C12
Bubbled film
2150×540×450
250
1
Power unit –C12
Carton
830×380×380
41
1
2.2 Storage
The packs must be kept in a covered and protected area in a temperature range 0f -10
℃
to +40
℃
. They must not be exposed to direct
sunlight, rain or water.
Stacking the packs
We advise against stacking because the packs are not designed for this type of storage. The narrow base, heavy weight and large size of
the packs make stacking difficult and potentially dangerous.
If stacking is unavoidable, use all appropriate precautions:
-never stack to more than 2 meters in height.
-never make stacks of single packs. Always stack pairs of packs in a cross pattern so that the base is bigger and the resulting stack is more
stable. Once the stack is complete, restrain it using straps, ropes or other suitable methods.
A maximum of two packs can be stacked on lorries, in containers, and in railway wagons, on condition that the packs are strapped
together and restrained to stop them falling.
2.2 Lifting and handling
The packs can be lifted and transported only by using lift trucks.
Never attempt to hoist or transport the unit using lifting straps.
When the lift is delivered make sure that it has not been damaged during transportation and that all the parts specified on the packing
list are present.
Packs must be opened adopting all the precautions required to avoid injury to persons (keep at a safe distance when cutting the straps)
or damage to parts of the machine (be careful that no parts are dropped while you are opening the packing)
Take special care with the hydraulic power unit, the control panel and the cylinder.
Содержание EE-62CE-60T
Страница 10: ...Installation Operation and Parts Manual EE 62CE 60T 10 3 4 Dimensions Overall height 4451...
Страница 11: ...Installation Operation and Parts Manual EE 62CE 60T 11 Overall height 5051...
Страница 28: ...Installation Operation and Parts Manual EE 62CE 60T 28 Annex 2 Electrical schemes and parts list...
Страница 30: ...Installation Operation and Parts Manual EE 62CE 60T 30...