background image

                                                                                         

Installation, Operation and Parts Manual 

EE-612FE 

                 

                                         

                                                                                                             

 

SAFETY NOTES   

1.1 Operation of lifting platforms   

This lift is specially designed for lifting motor vehicles. Users are not allowed to use it for any other purposes. The applicable national 

regulations, laws and directives must be observed.   

Only users aged 18 or above who have been instructed on how to operate the lifting platform and have proven their ability to do so 

to the owner are to be entrusted with unsupervised operation of lifting platforms. The task of operating the lifting platforms must be 

granted in writing.   

Before loading a vehicle onto the lifting platform, users should study the original operation instructions and familiarize themselves 

with the operating procedures in several trial runs.   

Lift vehicle within the rated load. Don’t attempt to raise vehicles with excessive weight.   

1.2 Checking of the lifting platforms   

Checks are to be based on the following directives and regulations: 

 

Basic principles for testing lifting platforms 

 

The basic health and safety requirements. 

 

The applicable accident prevention regulations   

The checks are to be organized by the user of the lifting platform. The user is responsible for appointing an expert or qualified 

person to perform checking. It must be ensure that the person chosen satisfies the requirements.   

The user bears special responsibility if employees of the company are appointed as experts or qualified persons.

  

1.2.1 Scope of checking   

Regular checking essentially involves performing a visual inspection and a functional test. This includes checking the condition of the 

components and equipment, checking that the safety systems are complete and functioning properly and that the inspection log 

book is completely filled in. The scope of exceptional checking depends on the nature and extent of any structural modification or 

repair work.   

1.2.2 Regular checking   

After initial commissioning, lifting platforms are to be checked by a qualified person at intervals of no longer than one year.   

A qualified person

 is somebody with the training and experience required to possess sufficient knowledge of lifting platforms and 

who is sufficiently familiar with the pertinent national regulations, accident prevention regulations and generally acknowledged 

rules of engineering to be able to assess the safe operating condition of lifting platforms.   

1.2.3 Exceptional checking   

Lifting platforms with a lift height of more than 2 meters and lifting platforms intended for use with people standing under the load 

bearing elements of the load are to be checked by an expert prior or reuse following structural modifications and major repairs to 

load bearing components.   

An expert

 is somebody with the training and experience required to possess specialist knowledge of lifting platforms and who is 

sufficiently familiar with the pertinent national work safety regulations, accident prevention regulations and generally acknowledged 

Содержание EE-612FE









































Отзывы: