EAE EE-612FE, Инструкция по установке, эксплуатации и ремонту

Страница: 25 / 40

Installation, Operation and Parts Manual
EE-612FE
25
S/N Components Methods Period
5 Control buttons
Check if control buttons work as "hold- to -run " and check if
they work as the function indicated.
Every day
6 Mechanical safety catch
Check if mechanical catch can engage and disengage effectively
by pushing control buttons.
Every day
7 Max height limit switch
Push the UP button and inspect and ensure the lifting platform
stops rising when the switch is activated.
Every day
8 Unloading valve
Inspect if the valve leaks or not. Clean or change the valve if it
leaks.
Every day
9
Running track inside the post
for carriages
Lubricate the track with NO.1 lithium based grease. No
obstruction on the track.
Every 3 months
10 Chain and its pins
Lubricate the chain with NO.1 lithium based grease .Change
the chains every 3 years or if any cracks occurred to the pin of
the chain.
Every 3 months
11
Bolts fasten the post and base
frame
Check with torque spanner. The torque is no less than 160N.m Every 3 months
12 Expansion bolts
Check with torque spanner. For M18 bolt ,the torque is no less
than 80N.m
Every 3 months
Whole Lift
Running the lift for several cycles with and without rated load.
The lift can run steadily and smoothly with no abnormal noise.
Every 3 months
13 Hydraulic oil
Change the oil 6 months after initial use and once per year
thereafter. Inspect the hydraulic oil and change the oil if the oil
becomes black or there is dirt in the oil tank.
Every year
If users stick to the above maintenance requirements, the lift will always keep a good working
condition and its service life could be extended.