EACON EC5000 Series, Руководство пользователя, Страница: 24 / 72

EC5000
-
40
- -
41
-
Description of Functional Parameter
5
EC5000
Description of Functional Parameter
5.1 Function Parameter List
Function Parameters Name Description
Setting
Range
Default Page Address
A00 Macro
parameters
Special industry application
Initial
Macro
A01 Data select Special industry application
Control
mode
select
A02 Control mode
0: V/F control
1.current vector control
Oper
mode
select
A03 Operation
mode selection
Setting operation frenquency setting
0: Operator Operator
1: Terminal Operator
2: Operator Analog terminal
3: Terminal Analog terminal
4: Operator Communication
5: Terminal Communication
6:Communication Communication
7:Communication Operator
8:Communication Terminal
Display
mode
A04 Display mode
(Display Units)
0:0.01Hz unit
1:0.1% unit
2~39: 120 x Fre Order(Hz)/A04(The
setting pole of motor)=r/min
40~3999:The scaling position is the
forth position 3-1 to 100% frequency
value.The 3~1 places decide the
settingvalue of 100% Fre.
Stopping
method
select
A05 Stopping
method
0:ramp to stop with first ramp time
(factory default)
1:coast to stop
2:coast to stop with first ramp time
3:coast to stop with second ramp time
Motor
rotation
A06 Motor rotation
A07 Prohibit
reverse operation
0:CCW shaft rotation
1:CW shaft rotation
0:Reverse operation enabled
1:Reverse operation disabled
Input
voltage
setting
A08 Input voltage Setting AC drive input voltage.
V/F
mode
A09 V/F Selection
A10 Rated Voltage
A11 Max
Frequency
A12 Max
Voltage
A13 Base
Frequency
A14 Mid.
Frequency
A15 Mid.
Voltage
A16 Start-up
frequency
A17 Start-up
voltage
Function Parameters Name Description
Setting
Range
Default Page Address
Accele-
ration
and
decele-
ration
time
setting
A18 Acceleration
time 1
A19 Deceleration
time 1
A20 Acceleration
time2
A21 Deceleration
time2
Unit:0.1s (1s for 1000s and above)
Unit:0.1s (1s for 1000s and above)
Multi-functional contact input selec-
tion or choose to accel time 2 in a
stop method choice, or internal con-
trol section's speed more effective,
same as A18 set.
Multi-functional contact input selec-
tion or choose to decal time 2 in a
stop method choice, or internal con-
trol section's speed more effective,
same as A19 set.
Model
dependent
Model
dependent
A22 Acceleration
time 3
A24 Acceleration
time 4
Multi-functional contact input selecti-
on or internal control section's speed
more effective. Same as A18 set.
A23 Deceleration
time 3
A25 Deceleration
time 4
Multi-functional contact input selecti-
on or internal control section's speed
more effective. Same as A19 set.
Multi-functional contact input selecti-
on or internal control section's speed
more effective. Same as A18 set.
Multi-functional contact input selecti-
on or internal control section's speed
more effective. Same as A19 set.
A26 S
-
curve
selection
0
:
No S
-
cruve
1
:
0
.
2 Sec
.
2
:
0
.
5 Sec
.
3
:
1
.
0 Sec
.
S-curve
selection
Frequency
command
setting
A27 Frequency 1
External control instruction 2 or
multi-speed control step 2 more
frequency of effective frequency 2
instructions.
External control instruction 3 or
multi-speed control step 3more
frequency of effective frequency 3
instructions.
External control instruction 4 or
multi-speed control step 4 more
frequency of effective frequency 4
instructions.
External control instruction 5 or
multi-speed control step 5 more
frequency of effective frequency 5
instructions.
The order for Main Frequency setting
A28 Frequency 2
A29 Frequency 3
A30 Frequency 4
A31 Frequency 5