Hardware Reference and Operational Manual: RemoteBox
Page 12
1.3 AUX Port: Auxiliary port
This auxiliary port allows the control of Band Pass filters such as ICE 419 type (or
similar). When RemoteBox senses Band Data information in the Band Data ports it
will automatically activate a signal in the DB15 female port to activate the appropriate
filter.
6 different signals can be activated based on 6 Band Data signals (12 for models with
2x Models) for the following ham radio bands:
-
10, 15, 20, 40, 80 and 160m
RemoteBox can provide two different voltage levels to this port:
•
5V
•
12V
Voltage can be switch with jumpers JP-C (Band Data1) and JP-D (Band Data2)
•
Jumper in 1-2 provides 5V output
•
Jumper in 2-3 provides 12V output
This is the Pin Out of the AUX Port:
•
Pin-1: 10m Band Data 1
•
Pin-2: 15m Band Data 1
•
Pin-3
20m Band Data 1
•
Pin-4
40m Band Data 1
•
Pin-5
80m Band Data 1
•
Pin-6
160m Band Data 1
•
Pin-7: Common Ground
•
Pin-8: Common Ground
•
Pin-9: Common Ground
•
Pin-10 160m Band Data 2
•
Pin-11 80m Band Data 2
•
Pin-12 40m Band Data 2
•
Pin-13 20m Band Data 2
•
Pin-14: 15m Band Data 2
•
Pin-15: 10m Band Data 2
DB9 Female connector
Remember: RemoteBox 2x12 version use this output for the antennas output 9-12.
