Hardware Reference and Operational Manual: RemoteBox
Page 19
4.1: Antenna Operation
Antenna operation with RBM is easy and very intuitive. The selected antenna is
highlighted in GREEN and the rest are GREY. A “2x” model (2x6 or 2x8) will present
two rows of antennas for Radio A and Radio B.
To manually activate any antenna all we have to do is to left click on it. Only one
antenna can be active per Radio.
With the “2x” models (2x6 or 2x8) we could run into conflicts if both Radios try to
use the same antenna. The Priorities menu will solve those conflicts.
4.2: Win-Test Setup
If you are a contester and use the Win-Test program, you can read the band both
radios (Radio 1 and 2). In this way, RBM can know the band for each radio and
automatically select the antenna of the 2 outputs. If you use 2 radios, for instance
you can configure as follows:
You must use the same broadcast address and port as it was configured at the Win-
Test program
When Radio-1 is enabled and it gets information from the “STN1” station at VFO-A,
automatically will configure the ANT1 Output for that band.
