e2v ELIIXA+, Руководство пользователя

Страница: 19 / 54

® 16k/8k CXP Color
19
e2v semiconductors SAS 2014
6.2 Camera Commands
6.2.1 Device Control
These are Identification values of the Camera. They can be accessed in the “Device Control” section
Feature Description
DeviceVendorName Get camera vendor name as a string (including ‘\0’)
DeviceModelName Get camera model name as a string (including ‘\0’)
DeviceFirmwareVersion Get camera synthetic firmware version (PKG version)
as a string (including ‘\0’)
DeviceVersion Get camera version as a string (hardware version)
(including ‘\0’)
DeviceManufacturerInfo
Get camera ID as a string (including ‘\0’)
DeviceUserID Get device user identifier as a string (including '\0')
DeviceID Read Serial Nb
ElectronicBoardID
Read Electronic Board ID
DeviceSFNCVersionMajor 1
DeviceSFNCVersionMinor 5
DeviceSFNCVersionSubMinor 0
DeviceTemperatureSelector
Device Temperature selector
DeviceTemperature Read Main board internal temperature (format signed Q10.2 = signed 8 bits, + 2 bits below
comma. Value from -512 to +511) in °C
DeviceScanType Linescan
Standby Disable : Standby mode (“False”)
Enable : Standby mode (“True”), no more video available but save power and temperature
Status Register
StatusWaitForTrigger
Bit 0: true if camera waits for a trigger during more than 1s
Status trigger too fast Bit 1: true if camera trigger is too fast
Reserved for Factory Bit 2 to 7
StatusWarningOverflow Bit 8: true if a an overflow occurs during FFC calibration or Tap balance (available only for
integrator/user mode)
StatusWarningUnderflow Bit 9: true if a an underflow occurs during FFC calibration or Tap balance (available only for
integrator/user mode)
Reserved for Factory Bit 10
Scrolling direction Bit 11: 0 : forward, 1: reverse
StatusErrorHardware Bit 16 : true if hardware error detected

A standby mode, what for ?
The Standby mode stops all activity on the
sensor level. The power dissipation drops down
to about 6W. During the standby mode, the grab
is stopped
Once the Standby mode turned off, the Camera
recovers in less than 1ms to send images again
from the sensor.
Internal Temperature
25
30
35
40
45
50
55
60
65
70
75
0 5 7
10 20 30 40 50 60 70 80 90 10
0
11
0
12
0
13
0
14
0
Time (mn)
°C
Standby Off
Standby On