E.ziclean vac100 by E.zicom
Manuel utilisateur – User Manual - Handleiding
E.ziclean vac100 by E.zicom
Manuel utilisateur – User Manual - Handleiding
5. Turning On/Off your e.ziclean®
1. Press the power switch when the cleaner is turned off (see the figure below), the
display will be on and the screen will flash for 3 seconds along with a startup sound, and
the robot is then turned into the standby status.
2. In the standby status of the robot, the current working mode will be displayed (default
show as “AUTO 1 UV” and the battery level on the screen).
3. Turn off the power in the standby status, the display will be shut.
4. In the power-off status of the cleaner, the remote controller cannot work.
6. Charging
Manual charging
1. You can directly charge the cleaner with its power adapter or with the charging dock
station.
2. When charging directly via the power adaptor, please connect the output plug of the
adapter with the charging socket on the robot. (See figure 1)
3. When charging with the charging dock station, please first connect the adapter to it,
and then place the cleaner tightly against the dock station to ensure a nicer contact
between the charging electrode of the cleaner and the charging terminal on the dock
station. (See figure 2)
4. During the charging process, the display will show the charging status, and the battery
level bars will turn red from the 1st bar to the 3rd bar in order repeatedly. (See figure 3)
5. Upon completion of the charging, the display will show 3 fully red bars. (See figure 4)
Self Charging
1. The cleaner will automatically start to search the charging dock station for recharge
when the battery level is lower than 15% during cleaning process.
2. When press the
DOCKING
button on the cover of the robot or the remote controller,
the function of self-charging will also be enabled.
3. During the above “DOCKING” mode, press any other button on cleaner or remote
controller, the cleaner will stop searching and enter the standby status. The directional
buttons on the remote controller can also be used to support the searching function.
