43/52
DCBS
User Manual / Ref. MAN_DCBS_GM_EN_V1.0
Table of Content
Introduction
Safety Guidelines
Maintenance and Storage
Before Use
Usage Precautions
Disassembly/Damage/Removal
Cleaning the Product
Getting Started
Safety Reminders
Appearance and Dimensions
Trolley LED’s
Remote Presentation
Remote Job Storage
Accessories
Initial Setup
Installation
Battery Cable Clamps Connection
Power Cable Connection and Power On
Wi-Fi Connection (Remote to Trolley)
Dealer Id. N°
Update
Settings
Preferences
Wi-Fi Connection (Remote to net)
Other Settings
Diagnostic and Charge
Remote handheld diagnostic tester
-Vehicle Selection from Database
-Manual Selection of Battery
-Start Diagnostic & Results
Trolley Diagnostic
-Pre Delivery Inspection Test (PDI) & Results
-Complete Diagnostic & Results
-Charge & Results
-Load Test & Results
-Reserve Capacity Test & Results
History (Results Storage)
Optimus
-Optimus Installation
-Using Optimus
Support Information
Warranty
Diagnostic and Charge 24/24
TROLLEY DIAGNOSTIC ////////
If the clamps are not connected, the tool will ask to connect the clamps.
Remote needs to be on the docking station to Start.
Press the Icon to start the Power Supply Mode.
The Power Supply Mode will not stop automatically. The user must
physically stop the charge once the ECU reflash is complete
When the user has stopped the test, the screen will display one of
the two Results below.
“Terminated by User” will be
displayed if the current is above
7.5A when the test is stopped.
“Battery is Charged” will be
displayed if the current is below
7.5A when the test is stopped.
