39/52
DCBS
User Manual / Ref. MAN_DCBS_GM_EN_V1.0
Diagnostic and Charge 20/24
TROLLEY DIAGNOSTIC ////////
Reserve Capacity Test
Reserve Capacity test is a pass/fail test based on a load to discharge and
check the battery voltage (V) response.
The option to select the battery type will show to select between Flooded,
AGM, and EFB batteries.
Then select the battery standard.
Use the navigation arrows of the keypad to enter the value indicated on the
battery (CCA SAE value in this example).
The tool will ask to measure the temperature of the battery.
Do NOT point laser at individuals or reflective objects.
Press the button on the keypad
to go to the next screen.
Table of Content
Introduction
Safety Guidelines
Maintenance and Storage
Before Use
Usage Precautions
Disassembly/Damage/Removal
Cleaning the Product
Getting Started
Safety Reminders
Appearance and Dimensions
Trolley LED’s
Remote Presentation
Remote Job Storage
Accessories
Initial Setup
Installation
Battery Cable Clamps Connection
Power Cable Connection and Power On
Dealer Id. N°
Wi-Fi Connection (Remote to Trolley)
Physical Connection (Remote to Trolley)
Update
Settings
Preferences
Other Settings
Diagnostic and Charge
Remote handheld diagnostic tester
-Manual Selection of Battery
-Vehicle Selection from Database
-Start Diagnostic & Results
Trolley Diagnostic
-Complete Diagnostic & Results
-Pre Delivery Inspection Test (PDI) & Results
-Charge & Results
-Load Test & Results
-Enhanced Diagnostic Mode (EDM) & Results
-Reserve Capacity Test & Results
History (Results Storage)
Optimus
-Optimus Installation
-Using Optimus
Support Information
-Batteries
-Error Messages
Warranty
