10/52
DCBS
User Manual / Ref. MAN_DCBS_GM_EN_V1.0
Initial Setup
1/8
INSTALLATION ////////
The unit needs to be placed in a clean, dry and ventilated area.
Tools necessary to assemble trolley:
- 4mm Allen Wrench, 10mm Socket/Wrench. (Step 3, use long screws)
- 3mm Allen Wrench. (Step 4, use short screw)
Once the unit is out of the box, the next step is to connect the docking station
to the trolley.
Then install the remote clamps hook and install the printer and the paper.
To use the remote by itself, connect the clamps on the side of the remote.
1.
3.
5.
2.
4.
6.
Caution: Insert screw carefully in step 3 to not damage cable with screw inside tube.
Table of Content
Introduction
Safety Guidelines
Maintenance and Storage
Before Use
Usage Precautions
Disassembly/Damage/Removal
Cleaning the Product
Getting Started
Safety Reminders
Appearance and Dimensions
Trolley LED’s
Remote Presentation
Remote Job Storage
Accessories
Initial Setup
Installation
Battery Cable Clamps Connection
Power Cable Connection and Power On
Dealer Id. N°
Wi-Fi Connection (Remote to Trolley)
Physical Connection (Remote to Trolley)
Update
Settings
Preferences
Other Settings
Diagnostic and Charge
Remote handheld diagnostic tester
-Manual Selection of Battery
-Vehicle Selection from Database
-Start Diagnostic & Results
Trolley Diagnostic
-Complete Diagnostic & Results
-Pre Delivery Inspection Test (PDI) & Results
-Charge & Results
-Load Test & Results
-Enhanced Diagnostic Mode (EDM) & Results
-Reserve Capacity Test & Results
History (Results Storage)
Optimus
-Optimus Installation
-Using Optimus
Support Information
-Batteries
-Error Messages
Warranty
