30/52
DCBS
User Manual / Ref. MAN_DCBS_GM_EN_V1.0
Diagnostic and Charge 11/24
Battery is GOOD (Battery Charged
for 20 minutes)
Unable to complete PDI, Run
Diagnostic. (PDI couldn’t complete,
Run Trolley Diagnostic to
determine if battery needs to be
changed.)
If the test is canceled, the tool will
show “Terminated by User”.
Results - (PDI)
Three different possible result screens.
After PDI has been performed, go
to the print icon to print the receipt
of the result. Remote has to be
replaced in the Docking Station to
print.
PRE-DELIVERY INSPECTION ////////
Table of Content
Introduction
Safety Guidelines
Maintenance and Storage
Before Use
Usage Precautions
Disassembly/Damage/Removal
Cleaning the Product
Getting Started
Safety Reminders
Appearance and Dimensions
Trolley LED’s
Remote Presentation
Remote Job Storage
Accessories
Initial Setup
Installation
Battery Cable Clamps Connection
Power Cable Connection and Power On
Dealer Id. N°
Wi-Fi Connection (Remote to Trolley)
Physical Connection (Remote to Trolley)
Update
Settings
Preferences
Other Settings
Diagnostic and Charge
Remote handheld diagnostic tester
-Manual Selection of Battery
-Vehicle Selection from Database
-Start Diagnostic & Results
Trolley Diagnostic
-Complete Diagnostic & Results
-Pre Delivery Inspection Test (PDI) & Results
-Charge & Results
-Load Test & Results
-Enhanced Diagnostic Mode (EDM) & Results
-Reserve Capacity Test & Results
History (Results Storage)
Optimus
-Optimus Installation
-Using Optimus
Support Information
-Batteries
-Error Messages
Warranty
