E-Swin E-Eye, Руководство пользователя, Страница: 17 / 27

32 33
SOFTWARE OPTIONS
❙
SOFTWARE OPTIONS
When you switch on and the home page opens, 3 menus will be available:
1 ) “Treatment of meibomian blepharitis” menu.
See section on “TREATMENT OF MEIBOMIAN BLEPHARITIS USING ”.
2 ) “Consumables” menu.
This menu shows the number of flashes remaining on the activation card and its
optic
cartridge. once the flash credit is exhausted, user only needs to replace the
activation card and its associated
optic
cartridge.
3 ) “Configuration” menu.
This menu will allow you to access the following 4 sub-menus:
PIN CODE
(screen K)
This code may be changed to a customized number.The default PIN code is “0000”. If you
do not change this code, you will not be requested to enter the PIN upon the start-up of the
device. However, if you change the default PIN code, you will be required to enter your PIN
whenever is restarted.
To change the PIN code:
- Go to the “Configuration” menu.
- Select the “PIN code” sub-menu.
Using the digital keypad:
- Enter the current PIN code, and validate using the “V” key.
- Enter the new PIN code and validate using the “V” key.
- A message indicating that the codes are valid will appear. Click on “OK”.
- The “Configuration” menu will be displayed.
It is possible to return to the “Configuration” menu at any time by clicking on icon
7
.
The “C” key can be used to correct the figure in each box.
SELECT LANGUAGE
(screen L )
Click on the flag which corresponds to the required language.
The “Language change confirmed” message will be displayed; click on “OK” to confirm
the change. The “Choice of language” sub-menu will be displayed once more.
The return icon
7
can be used to return to the “Configuration” menu.
SETTING OF PARAMETERS (VOLUME AND BRIGHTNESS)
(screen
M
)
It is possible to adjust:
- The volume, using the 2 arrows associated with the loudspeaker icon.
- The brightness of the touch screen, using the 2 arrows associated with the light bulb
icon.
The return icon
7
can be used to return to the “Configuration” menu.
MAINTENANCE
This access is exclusively reserved for the after-sales service.
IMPORTANT : We would strongly advise you to make a note of your PIN code. If you have entered a PIN code which you cannot
remember, it will be necessary to return your to us before it can be used again. Only our technical service is qualified to
execute the requisite operations for the unlocking of your . This service is available with the device out of guarantee, and
will be invoiced accordingly.
M
7
445
15 16
17 18
L
7
445
K
7
NOTE:
• After 7 seconds of inactivity, screen will switch over to standby mode. Flashing is still possible. Touch the screen to reactivate.
• After around fifteen minutes of inactivity, will switch over to pause mode. Press the "play" icon
13
to reactivate.