E-Swin E-Eye, Руководство пользователя, Страница: 15 / 27

28 29
22
23
24
❙
STAGE 5
INSERTION OF A NEW
optic
CARTRIDGE.
• Check the direction of insertion of the new cartridge:
For orientation purposes, one side of the cartridge is marked with a red disc. This side
must be aligned with the side of the applicator which carries the same red disc.
In brief, the two red discs must be matched up (photo
22
).
• After inserting the cartridge to the stop, you must check that it is correctly positioned:
it must be parallel to the end of the fixed part of the applicator (photo 23 ).
If this is not the case, the cartridge has been incorrectly inserted. You should remove the
cartridge and check that:
- The discs are correctly matched up (photo
22
).
- The electrodes have not been twisted (photo 24 ). If you have twisted the electrodes,
you must not insert your cartridge into the applicator, or you may cause serious
damage to your device. The damaged cartridge should be returned to us, and you
should order a new cartridge.
NOTE: Cartridges are not symmetrical, so they must be inserted in the right sense, and
certainly not in the other.
• Check that the cartridge is correctly engaged.
PRECAUTIONS:
throughout the procedure for the replacement of the cartridge, the fol-
lowing should not be touched under any circumstances:
- The tube or its reflector (photo 25 ),
- The electrodes of the tube (photo
26
).
If you have inadvertently touched the tube or its reflector, we would strongly advise
you to return the cartridge to us for replacement. Return carriage costs and the cost of
dispatching a new cartridge will not be assumed by E-Swin SAS.
❙
STAGE 6
CLEANING THE EXTERNAL AND INTERNAL OPTICAL COMPONENTS.
• Using the
clean
spray (photo
27
), clean the glass end of the applicator (optical
guide). To do this, apply the
clean
spray beforehand to a lint-free cloth, and clean the
optical guide.
• Before repositioning the mobile part of the applicator, systematically clean the
filter
(in the head of the applicator) on both sides using the
clean
spray (photos
28
). The
filter
is the flat element of red-coloured glass (see steps for the removal of internal
optical parts).
25
26
28
27
REPLACING
Optic
CARTRIDGE