9
Begin to Use
1.
Place the tray into the dispenser. The next dose will be the first
compartment to the right of the slot located directly at
6 o’clock
. At each
alarm time the try will rotate clockwise 1 compartment.
Important: Never force the tray to rotate.
2.
Press and hold button 2 until
‘
TRAY Z
’
is displayed.
a.
The tray will then move clockwise (forward) ½ a compartment to
the correct position.
3.
Close the lid.
4.
Turn the dispenser over and lock the dispenser. WARNING: When
locking/unlocking the cover do not turn the key more than ¼ of a turn.
Congratulations
Your e-pill MedTime Station Plus is now 100% setup.
Refilling the Tray
Resetting
‘DOSES LEFT’
Count After Refilling the Tray
The FILLED function will reduce
‘DOSES LEFT’
by 1 each time medications are
dispensed. Every time after the tray is refilled, it is required to set the FILLED
setting to the exact number of doses placed into the medication tray.
1.
Press and hold
button 3 until ‘BEFORE’ is displayed.
2.
Tap button 1 until
‘FILLED’ is displayed.
3.
Tap button 2 (decrease) or 3 (increase) to set the exact number of
compartments filled in the medication tray.
4.
Press and hold button 1 for a few seconds to save.
5.
Press and hold button 2 until
‘
TRAY Z
’
is displayed.
a.
The tray will then move clockwise (forward) ½ a compartment to
the correct position.
6.
The number of ‘DOSES LEFT’ displayed will now be the same as the
number entered in ‘FILLED.’ When zero doses remain ‘
- - - -
’ is
displayed.
