7
BATT: Set the type of battery in the dispenser for optimal battery life.
1.
When in menu B, tap button 1 until
‘
BATT
’
is displayed.
2.
Tap button 2 or 3 to set battery type to either:
a.
‘ALC’
for alkaline/non-rechargeable (most common).
b.
‘NIMH’
for rechargeable (uncommon).
SECURE: Auto-locking dispensing window. This setting refers to the
dispensing window only, the window where the pills dispense from. The
entire lid should always be kept locked.
ON: The dispensing window in the front of the lid only unlocks when the
alarm is sounding. The window will lock again 2 minutes after dispensing.
OFF: The dispensing window in the front of the lid never locks.
1.
When in menu B, tap button 1 until ‘SECURE’ is displayed.
2.
Tap button 2 to turn on or button 3 to turn off.
HOURS: Use either a 12-hour clock (AM/PM) or 24-hour clock.
The dispenser’s default uses the 24
-hour clock.
1.
When in menu B, tap button 1 until
‘
HOURS
’
is displayed.
2.
Tap button 2 or 3 to set to:
a.
12 hour
–
‘
AM
’
or
‘
PM
’
will be displayed next to the time.
b.
24 hour
–
‘
AM
’
or
‘
PM
’
will not be displayed next to the time.
DLS: Set the dispenser to automatically adjust for daylight saving.
1.
When in menu B, tap button 1 until
‘
DLS
’
is displayed.
2.
Tap button 2 or 3 to set to:
a.
‘
OFF
’
to disable.
b.
‘
EU
’
for European Daylight Saving.
c.
‘
US
’
for United States Daylight Saving.
START: Change this setting only if the dispenser is being filled off-site and
being delivered to the patient at a later date. This setting is rarely adjusted.
If this function is not needed, tap button 1 until you reach STOP.
If this function is needed, use the steps below.
1.
When in menu B, tap button 1 until ‘START’ is displayed.
2.
Set the Year (YY), Month (MM), Date (DD) and Hour (HH) to when you
want the dispenser to start operating. Tap button 2 (decrease) or 3
(increase) the settings.
