manualshive.com logo in svg

E-Mu Proteus 1000, Руководство по эксплуатации

Поделиться
Скачать
E-Mu Proteus 1000 Скачать руководство пользователя страница 168

160 

  E-MU Systems

Save/Copy Menu

Sound Authoring

Sound 
Authoring

This is a special purpose function to be used with the Flash sound 
authoring feature. Flash Sound SIMMs created on an EOS Ultra sampler can 
be used as a custom Proteus 1000 bank. Presets are then created in a User 
bank. When the bank of presets is finished, it can be copied, using this 
function, to the Flash SIMM. Flash SIMMs contain two separate memory 
locations. One of these memories contains the sound samples and the 
other memory can hold four banks of 128 presets.

WARNING: dangerous voltages are exposed inside Proteus 1000!

 Make 

sure power is completely disconnected from Proteus 1000 before removing 
the top panel. Replace the top panel before restoring power to the unit. The 
two sound SIMM sockets in Proteus 1000, marked 0 and 1, are located 
behind the controller knobs on the circuit board.

The destination Flash 

SIMM must be placed in SIMM socket 1. 

  

To Copy a User Bank to Flash

1.

Make sure a Flash SIMM is inserted into the extra Proteus 1000 SIMM 
socket.

_

_

_

_

If there is no Flash SIMM 

in the unit, the error message, 
“Requires Flash SIMM” will be 
displayed.

2.

Press the Save/Copy menu button.

3.

Rotate the Data Entry Control to select the “Copy User Bank” function 
shown above.

4.

Move the cursor to the “From” field and select the User bank that you 
want to copy to the Flash SIMM.

5.

Move the cursor to the “To” field and select the Flash bank that you 
want to contain the User bank.

6.

Press Enter. The Enter LED will flash and the screen below appears.

7.

Press Enter again to confirm. The following screen appears:

8.

The Flash presets cannot be used until Proteus 1000 is rebooted (power 
off then on). Reboot the Proteus 1000 and verify that the new Flash 
bank has been properly copied.

Copy User Bank
to Flash

COPY  USER  BANK  TO  FLASH

From: User

0

         To: Flash

2

Press   ENTER   to   Overwrite

Flash  SIMM  Presets

COPYING  USER  BANK  TO  FLASH

Done.  Please  Reboot  Now.

Содержание Proteus 1000


















































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды