UCx Feature Guide for Nortel IP Phones
UCx 4.5
11-Feb-2015
Page
of
30
36
Copyright © 2014 E-Metrotel
Global Inc.
1.
2.
3.
4.
5.
1.
2.
3.
1.
2.
3.
4.
5.
1.
While the phone is idle, press the
key (the key with the globe on Nortel IP phones that use
Services
graphics)
Use the down arrow key to locate the
line
Contrast
Press the
soft key
Invoke
Use the
and/or
soft keys or digits to to select the desired display contrast (depending on
Up
Down
0
9
the phone type, 4, 8 or 16 contrast levels are supported)
Press the
soft key to save the selected display contrast
Enter
6.8 Time Zone Offset
By default, the system time of the UC system is displayed on Nortel IP phones. If a phone is installed in a
X
different time zone, the UC system time must be adjusted in order to display the correct time for that time
X
zone. This feature allows the user of a Nortel IP phone to select the time zone offset to be used for the date
and time displayed on the phone.
6.8.1 Phones With Feature Key
While the phone is idle, press the
key and enter the feature code *510 (
- time zone
Feature
F*510
offset)
Use the
and/or
soft keys or digits to to select the desired time zone offset
Up
Down
0
9
Press the
soft key to save the selected time zone offset
Enter
6.8.2 Phones Without Feature Key
While the phone is idle, press the
key (the key with the globe on Nortel IP phones that use
Services
graphics)
Use the down arrow key to locate the
line
Time zone offset
Press the
soft key
Invoke
Use the
and/or
soft keys or digits to to select the desired time zone offset
Up
Down
0
9
Press the
soft key to save the selected time zone offset
Enter
6.9 Call Flow Control toggle all
The "
switches all configured CFCs between modes at the same time. If one or more
All: Call Flow Toggle"
CFCs are in
mode they will be changed to
mode. If all CFCs are in
mode then all
Override
Normal
Normal
CFCs will be changed to
mode.
Override
Dial
to toggle all CFCs
*28
6.10 Save Recording and Check Recording.
