‐
77
‐
Brightness It is to adjust monitor window brightness. The default value is
50. The larger the number is , the bright the video is. When you
input the value here, the bright section and the dark section of
the video will be adjusted accordingly. You can use this
function when the whole video is too dark or too bright. Please
note the video may become hazy if the value is too high. The
value ranges from 0 to 100.The recommended value ranges
from 40 to 60.
Contrast
It is to adjust monitor window contrast. The value ranges from
0 to 100. The default value is 50. The larger the number is, the
higher the contrast is. You can use this function when the
whole video bright is OK but the contrast is not proper. Please
note the video may become hazy if the value is too low. If this
value is too high, the dark section may lack brightness while
the bright section may over exposure .The recommended
value ranges from 40 to 60.
Saturation It is to adjust monitor window saturation. The value ranges
from 0 to 100. The default value is 50. The larger the number
is, the strong the color is. This value has no effect on the
general brightness of the whole video. The video color may
become too strong if the value is too high. For
4.4.2 Encode
The encode interface is shown as below
Please refer to the following sheet for detailed information.
