‐
116
‐
to set the source IP, destination IP (sometimes you need to input
corresponding port number).
Source IP refers to host IP address that sends out information (usually it is the
device host.) Destination IP refers to other systems that receive information.
Usually you do not need to set source port and target port. There are total four
groups IP. The record channel applies to one group (optional) only. Six frame
ID groups verification can guarantee information validity and legal.
Account
Note:
For the character in the following user name or the user group name, system
max supports 6-digits.The space in the front or at the end of the string is null.
The valid string includes: character, number, and underline.
The user amount default setup is 64 and the group amount default setup is
20. The factory default setup includes two levels: user and admin. You can
set the corresponding group and then set the rights for the respective user in
the specified groups.
User management adopts group/user modes. The user name and the group
name shall be unique One user shall be included in only one group.
User name
In this interface you can add/remove user and modify user name.
Add user: It is to add a name to group and set the user rights. There are four
